Terminal Crimping Tool with Interchangeable Die, 26-16 AWG, Full Cycle Ratchet, Suitable for Insulated Terminals
(Pack of
1)
SKU:95108 Item#: 95108
• Professional tool incorporating a single frame with several interchangeable dies
• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Frequently Bought Together
Crimping Tool Open Barrel 30-16 AWG
$0.00
Couldn't load pickup availability
Crimping Tool Hollow Pin Connector 20-10 AWG
$0.00
Couldn't load pickup availability
Round Cable Slitter 8 AWG-250MCM
$0.00
Couldn't load pickup availability
Quick Connect Crimping Tool 26-6 AWG
$0.00
Couldn't load pickup availability
Hands Free Butane Torch Self Igniting
$0.00
Couldn't load pickup availability
Rolocâ„¢ Holding Pad 2"
$0.00
Couldn't load pickup availability
Twist-On Holding Pad 30000rpm 2"
$0.00
Couldn't load pickup availability
Quick Change Cut-Off Mandrel Fits 3/8" Arbor
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 10mm
$0.00
Couldn't load pickup availability
Phillips Truss Head Sheet Metal Screw Steel 15mm
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
100 Piece, 1/4" Shank Master Bit Set
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
7" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
Product Description
• Professional tool incorporating a single frame with several interchangeable dies• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Technical Specifications
| Item#: | 95108 |
|---|---|
| Type | Crimping Tools |
| Style | Term Crimp Terminal and Connector Crimping System |
| Crimp Range | 26-16 |
| Description | Tool with 95104 Die |
| UNSPSC #: | 27111500 |
| TAA Compliant: | Yes |
| Weight: | 1.3 lb |
