Tire Repair Bias-Ply Chemical Cure Patch, 4-1/2", Octagon
(Pack of 10)

SKU:P85157 Item#: P85157

Kent®

• Fine feather edge eliminates chaffing
• 100% vulcanization
• For hot and cold repairs
• Use on tube and tubeless bias-ply tires
NOTE: Use Chemical Vulcanizing Cement, No. 82538, with these products.
CAUTION: Puncture repairs made on the wheel are classified as emergency repairs. The tire should not be used for more than 100 miles or at speeds greater than 50 miles per hour until the tire is removed from the rim and a permanent repair is made. NOTE: Injury MUST be within repairable limits.

Check Availability

Quantity

Catalog page#: 5-37

Frequently Bought Together

Front Fender Push-Type Retainer Nylon 20mm

Fender Bumper Shield Retainer 11/16"

Front Bumper Drive Rivet Plastic 10mm Hole

Front Fender Push-Type Retainer Nylon 20mm

Fender Bumper Shield Retainer 11/16"

Front Bumper Drive Rivet Plastic 10mm Hole

Non-Vacuum Hook and Loop Disc 6"

Aluminum Application Flap Disc 4-1/2"

Aluminum Application Flap Disc 4-1/2"

Front Fender Push-Type Retainer Nylon 20mm

Fender Bumper Shield Retainer 11/16"

Front Bumper Drive Rivet Plastic 10mm Hole

Rubber Snap-In TPMS Service Kit C11

Tire Repair Quill Style Large Round Stem Patch

Valve Core Stem

4" Thick Insert Tire Repair Strings For Radial

Item#: DY90324471

Tire Repair Lead Wire Insert 3/8"

Tire Repair Center Over Injury Patch 3 x 6"

Product Description

• Fine feather edge eliminates chaffing
• 100% vulcanization
• For hot and cold repairs
• Use on tube and tubeless bias-ply tires
NOTE: Use Chemical Vulcanizing Cement, No. 82538, with these products.
CAUTION: Puncture repairs made on the wheel are classified as emergency repairs. The tire should not be used for more than 100 miles or at speeds greater than 50 miles per hour until the tire is removed from the rim and a permanent repair is made. NOTE: Injury MUST be within repairable limits.

Technical Specifications

Item#:	P85157
Category	Tire Repair
Group	Tire Patches
Type	Bias-Ply Chemical Cure Patches
UNSPSC #:	25172502
TAA Compliant:	Yes
Weight:	0.87 lb

Product Restrictions

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Fender Apron Drive Rivet 8mm Hole

Engine Under Cover Drive Rivet Plastic 7mm Hole

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Front Fender Push-Type Retainer Nylon 20mm

Drive Rivet Nylon M8

Bumper Push-Type Retainer Nylon 18mm

Bumper Radiator and Grille Drive Rivet 7mm Hole

Push-Type Retainer Nylon 16 x 19mm

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Splash Shield Push Rivet Nylon 7mm Hole

Your Recently Viewed Items