Tire Repair Car/Light Truck Patch 1-3/4"
(Pack of 40.0)

Lawson

• A size for every puncture
• Self-vulcanizing
• Wafer-thin design – tapered edge
• Unit-molded patch – will not separate
• Designed for use on tube radial or bias-ply tires on passenger cars and light-duty trucks
• Recommended and approved by major oil and rubber companies
CAUTION: Puncture repairs made on the wheel are classified as emergency repairs. The tire should not be used for more than 100 miles or at speeds greater than 50 miles per hour until the tire is removed from the rim and a permanent repair is made.

Check Availability

Quantity

Catalog page#: 5-37

Frequently Bought Together

Hood Insulation Retaining Clip Nylon Black 10mm

Hex Head SEMS Tapping Screw M4.2-1.41

Phillips Truss Head Sheet Metal Screw Steel 15mm

Hood Insulation Retaining Clip Nylon Black 10mm

Hex Head SEMS Tapping Screw M4.2-1.41

Phillips Truss Head Sheet Metal Screw Steel 15mm

Fender Splash Shield Retainer Nylon 20mm

Rivet Nylon 1/4"

Bumper Drive Rivet Plastic 10mm Hole

Miniature Incandescent Bulb 12V 21CP

Carbide Brake Lathe Bit 3 Cutting Edges

Heat Shrink Tubing 20 to 16 AWG Black

Reinforced Truck Tire Patch 5 x 5"

Tire Repair Posi-Grip Plug Installation Tool 3/8"

Transmitter Service Kit with Long Stem

Tire Repair Pli-Seal Plug 2-1/4 x 1/4"

Tire Repair Center Over Injury Patch 3 x 4-3/4"

Tire Patch Ball Bearing Roller Stitcher

Product Description

• A size for every puncture
• Self-vulcanizing
• Wafer-thin design – tapered edge
• Unit-molded patch – will not separate
• Designed for use on tube radial or bias-ply tires on passenger cars and light-duty trucks
• Recommended and approved by major oil and rubber companies
CAUTION: Puncture repairs made on the wheel are classified as emergency repairs. The tire should not be used for more than 100 miles or at speeds greater than 50 miles per hour until the tire is removed from the rim and a permanent repair is made.

Technical Specifications

Item#:	82532
Category	Tire Repair
Group	Tire Patches
Type	Passenger Car/Light Truck Patches
Description	Round
Diameter	1-3/4 "
Shape	Round
UNSPSC #:	25172502
TAA Compliant:	No
Weight:	0.15 lb

Product Restrictions

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Woven Polyester Electrical Tape 19mm x 25m

Engine Under Cover Drive Rivet Plastic 7mm Hole

Bumper Fascia General Purpose Split Rivet 3/16"

Front Fender Push-Type Retainer Nylon 20mm

Fender Bumper Shield Retainer 11/16"

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Fender Apron Drive Rivet 8mm Hole

Rocker Molding Clip with Sealer Nylon Blue 17mm

Rocker Panel Molding Clip Nylon White 12 x 20mm

Inner Fender Shield Attaching Clip Nylon Black

Your Recently Viewed Items