Top Locknut, Grade C, Alloy Steel, Cadmium Finish, 7/8-9, 4 Pieces per Pack
(Pack of
1)
SKU:X80935 Item#: X80935
• Heat-treated for matched strength
• Will not loosen even under severe vibration
• Locking torque is retained for a minimum of five reapplications
• 150,000 PSI minimum proof strength
• Meets IFI and ANSI specifications
• Developed for Grade 8 applications
• Designed for use with Tuff-Torq® Cap Screws
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut
NOTE: Not recommended for use above 450°F (232°C).
For recommended torque values, see Lawson’s E546 brochure.
Frequently Bought Together
DIN 125A Flat Washer Grade 140 HV M8
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
$0.00
Couldn't load pickup availability
Locknut with Nylon Insert 18-8 SS 3/8-16
$0.00
Couldn't load pickup availability
DIN 985 Locknut with Nylon Insert Grade 8 M12-1.25
$0.00
Couldn't load pickup availability
Flange Locknut Grade 8 Steel M10-1.5
$0.00
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M8-1.25
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M8-1.25
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M12-1.75
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M6-1
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm
$0.00
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M10-1.25
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
Product Description
• Heat-treated for matched strength• Will not loosen even under severe vibration
• Locking torque is retained for a minimum of five reapplications
• 150,000 PSI minimum proof strength
• Meets IFI and ANSI specifications
• Developed for Grade 8 applications
• Designed for use with Tuff-Torq® Cap Screws
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut
NOTE: Not recommended for use above 450°F (232°C).
For recommended torque values, see Lawson’s E546 brochure.
Technical Specifications
| Item#: | X80935 |
|---|---|
| Diameter | 7/8 |
| Thread Pitch | 9 |
| Finish | Cadmium |
| Type | Top Lock Nut |
| Material | Alloy Steel |
| Thread | Coarse |
| Quantity Per Package | 4 |
| UNSPSC #: | 31161716 |
| TAA Compliant: | No |
| Weight: | 0.69 lb |
Product Restrictions
