Tru-Shrink Heat Shrink Tubing, 2 to 4/0 AWG, Red, 9" Length, 1.1" ID Before and 0.375" ID After Shrinkage, 3:1 Shrink Ratio
(Pack of
4)
Insulate and protect larger electrical wires with this heat shrink tubing. Designed to fit over thick electrical wires and ideal for applications like motor control, power distribution, and large appliance wiring. The tubing shrinks tightly around the wire to provide protection against moisture, dust, chemicals and other environmental factors that could cause damage. Manufactured for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present.
3:1 shrink ratio
Heat-activated adhesive liner surrounds material and produces a watertight seal
Non-corrosive with excellent fluid and fungus resistance non-nutrient, inert
Meets UL Flammability Test Specification 94V2 and UL Specification 486D
Elongation: 425%
Minimum tensile strength: 1,542 PSI
Minimum dielectric strength: 275V/mil
Low-temperature flexibility: Four hours at 67°F (55°C)
Maximum continuous operating temperature: 194°F (90°C)
Longitudinal change: 15% maximum, less than 5% typical
Rated at 600V
Designed for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Frequently Bought Together

Rechargeable Neck Light
Couldn't load pickup availability

Miniature Incandescent Bulb 12V 21CP
Couldn't load pickup availability

Rechargeable Penlight Flashlight
Couldn't load pickup availability

Heat Shrink Tubing 26 to 24 AWG Black
Couldn't load pickup availability

Tru-Shrink Heat Shrink Tubing 18 to 16 AWG Black
Couldn't load pickup availability

Heat Shrink Tubing 4 to 2/0 AWG Black
Couldn't load pickup availability

Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability

Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability

Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability

Heat Shrink Tubing 20 to 14 AWG Black
Couldn't load pickup availability

Heat Shrink Tubing 24 to 22 AWG Clear
Couldn't load pickup availability

Super 33+ Series Vinyl Electrical Tape Black 3/4"
Couldn't load pickup availability
Product Description
Insulate and protect larger electrical wires with this heat shrink tubing. Designed to fit over thick electrical wires and ideal for applications like motor control, power distribution, and large appliance wiring. The tubing shrinks tightly around the wire to provide protection against moisture, dust, chemicals and other environmental factors that could cause damage. Manufactured for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present. 3:1 shrink ratio
Heat-activated adhesive liner surrounds material and produces a watertight seal
Non-corrosive with excellent fluid and fungus resistance non-nutrient, inert
Meets UL Flammability Test Specification 94V2 and UL Specification 486D
Elongation: 425%
Minimum tensile strength: 1,542 PSI
Minimum dielectric strength: 275V/mil
Low-temperature flexibility: Four hours at 67°F (55°C)
Maximum continuous operating temperature: 194°F (90°C)
Longitudinal change: 15% maximum, less than 5% typical
Rated at 600V
Designed for use in harsh maintenance applications where abrasion, heat, fluids and fungus are present
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Technical Specifications
Item#: | 87752 |
---|---|
Type | Pre-Cut |
Style | Heavy Wall |
Wire Gauge Coverage | 2-4/0 AWG |
Length | 9 " |
Color | Red |
I.D. Before Shrinkage | 1.10 " |
I.D. After Shrinkage | .375 " |
Shrink Ratio | 3 to 1 |
Wall Thickness After Shrinkage | 0.120 " |
Voltage Rating | 600 V |
Temperature Rating | 194 °F |
Elongation | 425 % |
Tensile Strength | 1,542 PSI |
Approvals | UL, CSA |
UNSPSC #: | 39121723 |
TAA Compliant: | Yes |
Weight: | 0.28 lb |
Product Restrictions
