Wedge Type Stud Bolt Anchor, Steel, Zinc Finish, 3/8 x 5"
(Pack of
10)
SKU:91604 Item#: 91604
• Available in zinc-plated steel and stainless steel
1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Frequently Bought Together
Self-Drilling Wallboard Mini Anchor Kit 51Pcs
$0.00
Couldn't load pickup availability
SnapSkru® Self-Drilling Wall Anchor Kit 50Pcs
$0.00
Couldn't load pickup availability
SnapSkru® Nylon Mini Self-Drilling Wall Anchor Kit
$0.00
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M10-1.25
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 10 Steel M10-1.5
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 1/8"
$0.00
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 3/8 x 2-1/4"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 3/4 x 10"
$0.00
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 1/2 x 2-3/4"
$0.00
Couldn't load pickup availability
Product Description
• Available in zinc-plated steel and stainless steel1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Technical Specifications
| Item#: | 91604 |
|---|---|
| Diameter | 3/8 " |
| Length | 5 " |
| Thread Length | 3-1/4 " |
| Drill Size | 3/8 " |
| Material | Carbon Steel |
| Finish | Bright Zinc |
| Type | Wedge Anchor |
| Proof Test Load | 2,420 lb |
| Length Identification Code | G |
| Size | 3/8X5 " |
| Minimum Embedment | 1-3/4 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.44 lb |
