106 Mild Steel Stick Electrode Chematized Flux / Moisture Proof/Polarity Dc Or Ac 3/32"
(Pack of 15)

SKU:EG1065000G Item#: EG1065000G

Kent Automotive

A special Chem-A-Tized2 flux coating that provides the best all-position performance of any steel electrode and allows it to operate at lower amperages. The flux has cleaning agents that remove oxides and contaminates from the weld, including rust, grease and paint. Even welds through water.
• Moisture Proof Flux – Guaranteed to never go bad when stored
• Superior all-position weldability with the exclusive Chem-A-Tized2 process
• Welds Contaminated Steel – Less pre-cleaning and weld clean-up
• Very Easy to Use – Practically welds by itself with little or no-spatter
• Tensile Strength: Up to 83,000 PSI/572 Mpa
• Yield Strength: 69,000 PSI/476 Mpa
• Elongation: 25%
• Machinability: Excellent
• Hardness: 85 Rb
• Impact: 20 ft.-lbs.
• Current: DC or AC

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

104 Mild Steel Low Hydrogen Stick Electrode

Item#: EG1045000B

102 High Strength Steel Electrode 1/4

Item#: EG10210000

103 The Ultimate Low Hydrogen Mild Steel Electrode 5/32

Item#: EG1033000R

Front Bumper Drive Rivet Plastic 7mm Hole

Front Bumper Push-Type Retainer Nylon 20mm

Front Bumper and Radiator Support Drive Rivet

MIG 160i 30-160A 115/230V WeldingMachine

Ground Clamp 200A /w 10' Cable

Connector DINSE 10-25 Male

177890 Plasma Cutting Tip

8-7502 Plasma Cutting Electrode

192047 Plasma Cutting Electrode

Product Description

A special Chem-A-Tized2 flux coating that provides the best all-position performance of any steel electrode and allows it to operate at lower amperages. The flux has cleaning agents that remove oxides and contaminates from the weld, including rust, grease and paint. Even welds through water.
• Moisture Proof Flux – Guaranteed to never go bad when stored
• Superior all-position weldability with the exclusive Chem-A-Tized2 process
• Welds Contaminated Steel – Less pre-cleaning and weld clean-up
• Very Easy to Use – Practically welds by itself with little or no-spatter
• Tensile Strength: Up to 83,000 PSI/572 Mpa
• Yield Strength: 69,000 PSI/476 Mpa
• Elongation: 25%
• Machinability: Excellent
• Hardness: 85 Rb
• Impact: 20 ft.-lbs.
• Current: DC or AC

Technical Specifications

Item#:	EG1065000G
Welding Process	Stick
Type	Stick
Diameter	3/32 "
Tensile Strength	83,000 PSI
Elongation	25 %
Base Metal	Mild And Medium Carbon Steel
Hardness	85 HRB
Polarity	DCEP
UNSPSC #:	23271810
TAA Compliant:	Yes
Weight:	15.33 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

107 Mild Steel High Penetration Low Alloy Electrode 3/32"

Item#: EG10750000

109 High Strength Electrode 3/32

Item#: EG10950000

109 High Strength Electrode 1/8

Item#: EG10940000

660 Mild Steel Flux Core Low Hydrogen Mig Wire .035X10Lb

Item#: EG66040035

106 Mild Steel All Purpose Electrode 1/16

Item#: EG1067000G

664 Self Shielding Mild Steel Flux Core Mig Wire .035X10LB

Item#: EG66440035

660 Mild Steel Flux Core Low Hydrogen Mig Wire 1/16X33Lb

Item#: EG66080062

104 Mild Steel Low Hydrogen Stick Electrode

Item#: EG1043000B

103 The Ultimate Low Hydrogen Mild Steel Electrode 1/8

Item#: EG1034000R

107 Mild Steel High Penetration Low Alloy Electrode 3/16"

Item#: EG10720000

663 Self Shielding Mild Steel Flux Core Mig Wire .062X10LB

Item#: EG66340062

104 Mild Steel Low Hydrogen Stick Electrode

Item#: EG1044010B

Your Recently Viewed Items