889 Cast Iron Stick Rod Electrode, Flux Coated, 180 to 222 HB Hardness, 60 to 100 Amps, DCRP/DCSP/AC Polarity, 5/32"
(Pack of
10)
All-position welding for any type of weldable cast iron repair and cast iron to steel.
Superior Advantages
High strength welds
Fully machinable
Pass-over-pass welding to save time
All-position welding may eliminate the need to dismantle equipment to perform repairs
For all cast irons even steel to cast iron
Tensile Strength: Up to 84,000 PSIHardness: 180 222 BHNPolarity: AC or DC Straight or Reverse
Typical Applications
Pump and bearing housings
Cylinder blocks and heads
Machine bases
Manifolds and exhaust systems
Usage Procedure:Remove grease, scale and other impurities from weld area. Bevel cracks or breaks (70° to 90° V). CRONACUT™ 1100 is the fastest and easiest method to prepare section for weld repairing. Use a short to medium arc at the lowest possible amperage for best results. Employ weaving technique or stringer beads. Peen to relieve stress. Remove slag between passes. Slow cooling to room temperature recommended.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together

631 Cast-Weld Fc Alloy Wire .035X11LB
Couldn't load pickup availability

270 Cast Iron Stick Rod Electrode 1/8"
Couldn't load pickup availability

222 Cast Iron Stick Rod Electrode 3/32"
Couldn't load pickup availability

34 Oz Manual Sprayer
Couldn't load pickup availability

18" Locking Smooth Operator Clamp
Couldn't load pickup availability

Quick Seal 2000 Sprayable Seam Sealer Black
Couldn't load pickup availability

Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability

Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability

Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability

Heat Stick 400F Degrees
Couldn't load pickup availability

710 Stainless Steel Electrode 3/32"
Couldn't load pickup availability

Heat Stick 250F Degrees
Couldn't load pickup availability

9-6501 Plasma Cutting Tip
Couldn't load pickup availability

9-6004 Plasma Cutting Shield Cup
Couldn't load pickup availability

177888 Plasma Cutting Deflector
Couldn't load pickup availability
Product Description
All-position welding for any type of weldable cast iron repair and cast iron to steel.Superior Advantages
High strength welds
Fully machinable
Pass-over-pass welding to save time
All-position welding may eliminate the need to dismantle equipment to perform repairs
For all cast irons even steel to cast iron
Tensile Strength: Up to 84,000 PSIHardness: 180 222 BHNPolarity: AC or DC Straight or Reverse
Typical Applications
Pump and bearing housings
Cylinder blocks and heads
Machine bases
Manifolds and exhaust systems
Usage Procedure:Remove grease, scale and other impurities from weld area. Bevel cracks or breaks (70° to 90° V). CRONACUT™ 1100 is the fastest and easiest method to prepare section for weld repairing. Use a short to medium arc at the lowest possible amperage for best results. Employ weaving technique or stringer beads. Peen to relieve stress. Remove slag between passes. Slow cooling to room temperature recommended.
Technical Specifications
Item#: | P12006 |
---|---|
Welding Process | Stick |
Type | Flux Coated |
Diameter | 5/32 " |
Tensile Strength | 84,000 PSI |
Base Metal | Cast Iron |
Hardness | 180-222 BHN |
Polarity | DCRP/AC |
UNSPSC #: | 23271810 |
TAA Compliant: | Yes |
Weight: | 10.0 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov



