Chatterless Countersink, High Speed Steel, 82° Six Flute, 850RPM, 5/8 x 2-5/16"
(Pack of
1)
SKU:57149 Item#: 57149
Centerline Angle 41°, Included Angle 82°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Chatterless Countersink 82° Single Flute 3/8"
$0.00
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 82o Angle Countersink, 1-Flute
$0.00
Couldn't load pickup availability
Countersink 82° Single Flute 9/16"
$0.00
Couldn't load pickup availability
Cryocut 1" Body Dia. 82o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 90o Angle Countersink, 1-Flute
$0.00
Couldn't load pickup availability
Chatterless Countersink Kit 4Pcs 82° Single Flute
$0.00
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
8" Dual Jaw Adj and Pipe Wrench
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
1/8" - 1/2 " Cryonitride Spiral Fluted Step Drill - 1/4" Shank
$0.00
Couldn't load pickup availability
Product Description
Centerline Angle 41°, Included Angle 82°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57149 |
|---|---|
| Type | Countersink |
| Body Diameter | 5/8 " |
| Flutes | Six |
| Included Angle | 82 ° |
| Shank Size | 3/8 " |
| Shank Length | 1-1/8 " |
| Overall Length | 2-5/16 " |
| For Screw Size | No. 8 - 1/4 |
| Maximum RPM (Aluminum) | 850 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 420 RPM |
| Centerline Angle | 41 ° |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.13 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
