Chatterless Countersink Kit 4Pcs 82° Six Flute
(Pack of
1.0)
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
• Contains four countersinks: 57139, 57141, 57143, 57145
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Cryocut 3/8" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 3/8"
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 82o Angle Countersink, 1-Flute
Couldn't load pickup availability
Cryocut 3/4" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 1-1/4" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 3/8" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
High-Tech Seam Sealer Clear 5fl.oz
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
11Pc Lock and Load Hammer Set
Couldn't load pickup availability
Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability
Product Description
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration• No break-in period required
• Made of M2 high-speed steel
• Made in USA
• Contains four countersinks: 57139, 57141, 57143, 57145
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57407 |
|---|---|
| Type | Countersink Set |
| Body Diameter | 3/16 - 3/8 " |
| Flutes | Six |
| Included Angle | 82 ° |
| Shank Size | Multiple " |
| Shank Length | Multiple " |
| Overall Length | Multiple " |
| For Screw Size | Multiple |
| Maximum RPM (Aluminum) | Multiple RPM |
| Maximum RPM (Cast Iron or Mild Steel) | Multiple RPM |
| Number of Pieces | 4 |
| Centerline Angle | 41 ° |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.77 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
