Countersink for Chamfering or Deburring, 82° Single End Single Flute, #12 to 9/16" Screws, 1-1/8 x 2-7/8"
(Pack of
1)
SKU:97975 Item#: 97975
• 82° included angle
• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Cryocut 3/4" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 3/16"
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 1"
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 82o Angle Countersink, 1-Flute
Couldn't load pickup availability
Countersink 82° Single Flute 9/16"
Couldn't load pickup availability
Countersink 82° Single Flute 5/8"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
Cryobit 1/8" Dia. Maintenance Drill Bit , 135o Split Point, No Flats
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Bumper Cover Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
Couldn't load pickup availability
Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability
Master Security Bit Set 203Pc
Couldn't load pickup availability
Product Description
• 82° included angle• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97975 |
|---|---|
| Type | Countersink |
| Body Diameter | 1-1/8 " |
| Flutes | Single |
| Included Angle | 82 ° |
| Shank Size | 1/2 " |
| Overall Length | 2-7/8 " |
| For Screw Size | No. 12 - 9/16 " |
| Cutting Diameter Min. | 0.44 " |
| Cutting Diameter Max. | 1.03 " |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.2646 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
