High-Performance M2-AL Annular Cutter 1-9/16"
(Pack of
1.0)
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.
• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
1-3/8" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
7/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
HSS Annular Cutter 1-3/16"
Couldn't load pickup availability
Annular Cutter Center Pin For 7/16" Diameter Cutter
Couldn't load pickup availability
Annular Cutter Center Pin 1/2 to 2-3/8"
Couldn't load pickup availability
Annular Cutter Center Pin 1/2 to 2-3/8"
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Drive Rivet Nylon M8
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Large Index-Tend Pry Bar
Couldn't load pickup availability
Cordless Right Angle Grinder Charging Bundle
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Product Description
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 15272 |
|---|---|
| Cutting Diameter | 1-9/16 " |
| Depth of Cut | 2 " |
| Tooth Material | M2-AL |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.62 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
