Combination Drill-Tap Kit, M1 High Speed Steel, 118° Split Point, M3 to M12, 8 Pieces
(Pack of
1)
SKU:26748 Item#: 26748
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryo-Drap 7/16"-20 Drill & Tap Combo, 135o Split Point, W/Flats
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap M5 x 0.8
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap 1/2-20
$0.00
Couldn't load pickup availability
Small General Purpose Bimetal Hole Saw Kit 9Pcs
$0.00
Couldn't load pickup availability
Fire and Rescue Reciprocating Blade 6"
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
$0.00
Couldn't load pickup availability
Bumper Fascia Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
$0.00
Couldn't load pickup availability
Cryotap M7 x 1.0 Metric Plug Hand Tap
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
$0.00
Couldn't load pickup availability
Razor Blade Single Edge w/Notch
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 26748 |
|---|---|
| Type | Combination Drill Tap Set |
| Point | 118° Split |
| Diameter | M3 to M12 |
| Pitch | Multiple |
| Tap Length | Multiple |
| Material Thickness | Multiple " |
| Material | HSS |
| Overall Length | Multiple " |
| Number of Pieces | 8 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 1.34 lb |
