HSS Combination Drill-Tap M3
(Pack of
1)
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole
• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
HSS Combination Drill-Tap 7/16-14
Couldn't load pickup availability
Cryo-Drap 7/16"-20 Drill & Tap Combo, 135o Split Point, W/Flats
Couldn't load pickup availability
HSS Combination Drill-Tap M5 x 0.8
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)
Couldn't load pickup availability
Mini Surface Prep Kit
Couldn't load pickup availability
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Cryotap 1/2"-13 Bottoming Hand Tap
Couldn't load pickup availability
3-Flute HSS Hand Tap 10-32
Couldn't load pickup availability
3-Flute HSS Hand Tap 10-24
Couldn't load pickup availability
Abrasive Hand Pad Commercial Grade 6 x 9"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Product Description
• Eliminates the need for using a twist drill and a separate tap to achieve a tapped hole• 118° spiral point
• Three positive driving flats on the shank
• Neck is reduced below minor diameter for added clearance
• Made of M1 high-speed steel
• Made in USA
• Ideal for cordless drills; can be used in hand-held or stationary drills for tapping through holes
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 27378 |
|---|---|
| Type | Combination Drill Tap |
| Point | 118° Split |
| Diameter | M3 |
| Pitch | 0.5 mm |
| Tap Length | 0.3400 " |
| Material Thickness | 1/4 " |
| Material | HSS |
| Overall Length | 2.20 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.01 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
