HSS Spiral Point Hand Tap 5-40
(Pack of
1)
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
NOTE: Item No. 61106 through 61111 do not have reduced neck or threads.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Drive Rivet Nylon M8
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Pilotdrive Cryotap 7/8"-14 Starter Hand Tap
Couldn't load pickup availability
HSS Spiral Point Hand Tap 7/16-14
Couldn't load pickup availability
Pilotdrive Cryotap M7 x 1.0 Starter Hand Tap
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 8-32
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 7/8-14
Couldn't load pickup availability
3-Flute HSS Taper Hand Tap M2.5 x 0.45
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
NOTE: Item No. 61106 through 61111 do not have reduced neck or threads.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61110 |
|---|---|
| Type | Machine Screw |
| Diameter | #5 |
| Pitch | 40 |
| Flutes | 2 |
| Thread Length | 5/8 " |
| H Limits | GH3 |
| Material | HSS |
| Recommended Drill Size | No. 39 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.015 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
