HSS Spiral Point Hand Tap 3-48
(Pack of
1.0)
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
NOTE: Item No. 61106 through 61111 do not have reduced neck or threads.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Reciprocating Saw Blade 9" 14TPI
Couldn't load pickup availability
M2 Sheet Metal Hole Cutter 5/16"
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
HSS Spiral Point Hand Tap M10 x 1.5
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Starter Hand Tap
Couldn't load pickup availability
HSS Spiral Point Hand Tap 8-36
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
Couldn't load pickup availability
Cryotap M7 x 1.0 Metric Plug Hand Tap
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
Couldn't load pickup availability
M2 Sheet Metal Hole Cutter 3/8"
Couldn't load pickup availability
1/2" Cordless Hammer Drill Driver Charging Bundle
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
NOTE: Item No. 61106 through 61111 do not have reduced neck or threads.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 61107 |
|---|---|
| Type | Machine Screw |
| Diameter | #3 |
| Pitch | 48 |
| Flutes | 2 |
| Thread Length | 1/2 " |
| H Limits | GH2 |
| Material | HSS |
| Recommended Drill Size | 5/64 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.01 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
