Pilotdrive Cryotap M16 x 1.5 Starter Hand Tap
(Pack of 1.0)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Frequently Bought Together

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

8Pc Metric Flare Nut Wrench Set

Item#: DY89310185

9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter

Item#: DY89310354

Adhesive-Back Shim Stock 1/8 x 5/8" x 50'

Woven Polyester Electrical Tape 19mm x 25m

High-Tech Seam Sealer Clear 5fl.oz

Engine Under Cover Drive Rivet Plastic 7mm Hole

Pilotdrive Cryotap #10-24 Starter Hand Tap

Item#: DY80635005

HSS Spiral Point Hand Tap 8-32

HSS Spiral Point Hand Tap M8 x 1.25

4-Flute HSS Plug Hand Tap M14 x 1.5

Cryo-Drap #10-24 Drill & Tap Combo, 135o Split Point, W/Flats

Item#: DY80244413

Carbon Steel Replacement Hand Tap 1/2-13

11Pc Lock and Load Hammer Set

Item#: DY81420015

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Interchangeable Hex Bit Set 24Pc SAE

Item#: DY89310520

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80636025
Type	Metric
Diameter	M16
Pitch	1.5 mm
Flutes	4
Overall Length	3-13/16 "
Recommended Drill Size	37/64 "
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.185 lb

Product Restrictions

California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Abrasive Hand Pad All Purpose 6 x 9"

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Zirconium Grain Locking Grinding Disc 2"

Your Recently Viewed Items