Turnbuckle, Eye and Eye, Galvanized, 1/2" x 6"
(Pack of
1)
SKU:1442535 Item#: 1442535
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Turned Eyebolt, Zinc-Plated, 1/2" x 3"
Couldn't load pickup availability
Shoulder Eyebolt, Machinery, Self-Colored, M14 x 2.0 x 44.5
Couldn't load pickup availability
Unwelded Eye Bolt with Nut, Stainless Steel, 3/8" - 16, 500 lb WLL
Couldn't load pickup availability
AkroBin®, Yellow, 5-3/8" x 4-1/8" x 3"
Couldn't load pickup availability
Shelf Bin, Blue, 23-5/8" x 4-1/8" x 4"
Couldn't load pickup availability
Nest & Stack Tote Lid, Gray, 19-1/2" x 15-1/2"
Couldn't load pickup availability
Rivet Nylon 1/4"
Couldn't load pickup availability
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 3/8" x 6.00" Take Up
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Jaw and Jaw, 3/8" x 6.00" Take Up
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 5/8" x 6"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442535 |
|---|---|
| Type | Eye and Eye |
| Diameter | 1/2 " |
| Closed Length | 13 " |
| Working Load Limit | 2,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
| Weight: | 1.58 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
