Turnbuckle, Eye and Eye, Galvanized, 5/8" x 9"
(Pack of
1)
SKU:1442134 Item#: 1442134
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Shoulder Eyebolt, Machinery, Stainless Steel, 3/4" x 2"
Couldn't load pickup availability
Turned Eyebolt, Zinc-Plated, 1/4" x 5"
Couldn't load pickup availability
Eye Bolt with Nut, Stainless Steel, 3/8"-16, 1,200 lb WLL
Couldn't load pickup availability
AkroBin®, Red, 18" x 8-1/4" x 9"
Couldn't load pickup availability
AkroBin®, Blue, 10-7/8" x 4-1/8" x 4"
Couldn't load pickup availability
ShelfMax™ Bin, Blue, 17-5/8" x 6-5/8" x 6"
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability
Turnbuckle, Aluminum, Eye and Eye, 3/8" x 2.98" Take Up
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 3/4" x 12"
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 3/8" x 6" Take Up
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442134 |
|---|---|
| Type | Eye and Eye |
| Diameter | 5/8 " |
| Closed Length | 17 " |
| Working Load Limit | 3,500 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
