Turnbuckle, Eye and Eye, Galvanized, 7/8" x 12"
(Pack of
1)
SKU:1442213 Item#: 1442213
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Shoulder Eyebolt, Machinery, Galvanized, M18 x 2.5 x 51
Couldn't load pickup availability
Eyebolt, With Nut, Galvanized, 7/8" x 24"
Couldn't load pickup availability
Shoulder Eyebolt, Machinery, Self-Colored, 1-1/4" x 3"
Couldn't load pickup availability
Wire Rope, Steel, Vinyl Coated, 7x19, 1/8", 2,000 lbs Breaking Strengt
Couldn't load pickup availability
Wire Rope, Steel, Vinyl Coated, 7x7, 3/32", 920 lbs Breaking Strength
Couldn't load pickup availability
Wire Rope, Steel, Bare, 7x19, 1/8", 2,000 lbs Breaking Strength
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability
Bumper Cover Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Turnbuckle, Stainless Steel, Eye and Eye, 5/8" x 8" Take Up
Couldn't load pickup availability
Turnbuckles Eye and Eye 1/2" x 9" Takeup
Couldn't load pickup availability
Turnbuckles Hook and Eye 1/4" x 4" Takeup
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class D
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442213 |
|---|---|
| Type | Eye and Eye |
| Diameter | 7/8 " |
| Closed Length | 22-1/2 " |
| Working Load Limit | 7,200 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
