Turnbuckle, Jaw and Eye, Galvanized, 1" x 6"
(Pack of
1)
• Turnbuckles can be used to apply tension to wire rope or cable
• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Turned Eyebolt, Zinc-Plated, 3/8" x 3-1/2"
Couldn't load pickup availability
Unwelded Eye Bolt with Nut, Stainless Steel, 1/4" - 20, 200 lb WLL
Couldn't load pickup availability
Eye Bolts, Machinery, 1 x 2-1/2"
Couldn't load pickup availability
AkroBin®, Red, 14-3/4" x 16-1/2" x 7"
Couldn't load pickup availability
AkroBin®, Blue, 10-3/4" x 8-1/4" x 7"
Couldn't load pickup availability
ShelfMax™ Bin, Red, 11-5/8" x 6-5/8" x 6"
Couldn't load pickup availability
Fender Splash Shield Push Rivet Nylon 7mm Hole
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Hood Insulation Retaining Clip Nylon Black 10mm
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 1" x 6"
Couldn't load pickup availability
Turnbuckle, Jaw and Jaw, Galvanized, 1/2" x 6"
Couldn't load pickup availability
Turnbuckle, Eye and Eye, Galvanized, 7/8" x 12"
Couldn't load pickup availability
Product Description
• Turnbuckles can be used to apply tension to wire rope or cable• Composed of a forged body and two end fittings
• Must only be applied to loads within their working load limit
• Apply turnbuckles in a straight in-line manner only. Do not allow anything to contact the turnbuckle body or end attachment threaded shanks
• Working load limits are based on a safety factor of 5 to 1
• Meets ASTM F1145 Type 1, Grade 1, Class H
• Apply load to the center of end attachment eyes – do not side load eyes
CAUTION: Do not exceed working load limits.
Technical Specifications
| Item#: | 1442097 |
|---|---|
| Type | Jaw and Eye |
| Diameter | 1 " |
| Closed Length | 19-1/8 " |
| Working Load Limit | 10,000 lb |
| Material | Forged Steel |
| Finish | Galvanized |
| UNSPSC #: | 24101611 |
| TAA Compliant: | Yes |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
