Wire Thread Insert Repair Kit 1/4-28
(Pack of
1.0)
Fix damaged threads the smart way with the Fix-A-Thred® Wire Thread Insert Repair Kit. Featuring helically-wound stainless steel inserts, this kit restores stripped threads stronger than the original. Each kit includes everything you need—tap, inserts, installation tool, and tang removal tool (in select kits)—neatly packaged in a durable case. Precision-engineered for a wide temperature range and high tensile strength, it's the most cost-effective solution for professional-grade thread repair.
• Helically-wound inserts restore thread strength beyond original specs
• Made from 18-8 stainless steel for corrosion resistance and durability
• Tensile strength of at least 200,000 PSI
• Effective from –275°F to +774°F (–170°C to +412°C)
• Kit includes tap, inserts, installation tool, tang removal tool (varies), and storage box
• Inserts correct pitch and angle errors for reliable fastener engagement
Fix-A-Thred® Insert Installation InstructionsDrill to clear out the damaged thread (if necessary).Thread insert tap supplied. Tap thread should match up with bolt.Wind insert in with light downward pressure until 1/4 to 1/2 turn below surface, driving tang towards bottom of the hole.Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For large fine threads, use long nose pliers and pull tang out.
To insure proper installation of inserts, always use the correct and corresponding tools.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Steel Crimped Cup Brush 1-3/4"
Couldn't load pickup availability
Abrasive Hand Pad Commercial Grade 6 x 9"
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Micro Screw Power Extractor 1/4"
Couldn't load pickup availability
Broken Bolt Power Extractor 1/4"
Couldn't load pickup availability
Rethreading Die M10 x 1.5
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
Blade Disposal Container
Couldn't load pickup availability
Razor Blade, Single Edge, High Carbon Steel
Couldn't load pickup availability
Wire Thread Insert Repair Kit 3/4-10
Couldn't load pickup availability
Wire Thread Insert Repair Kit 1/2-20
Couldn't load pickup availability
Wire Thread Insert Repair Kit 5-40
Couldn't load pickup availability
Product Description
Fix damaged threads the smart way with the Fix-A-Thred® Wire Thread Insert Repair Kit. Featuring helically-wound stainless steel inserts, this kit restores stripped threads stronger than the original. Each kit includes everything you need—tap, inserts, installation tool, and tang removal tool (in select kits)—neatly packaged in a durable case. Precision-engineered for a wide temperature range and high tensile strength, it's the most cost-effective solution for professional-grade thread repair.• Helically-wound inserts restore thread strength beyond original specs
• Made from 18-8 stainless steel for corrosion resistance and durability
• Tensile strength of at least 200,000 PSI
• Effective from –275°F to +774°F (–170°C to +412°C)
• Kit includes tap, inserts, installation tool, tang removal tool (varies), and storage box
• Inserts correct pitch and angle errors for reliable fastener engagement
Fix-A-Thred® Insert Installation InstructionsDrill to clear out the damaged thread (if necessary).Thread insert tap supplied. Tap thread should match up with bolt.Wind insert in with light downward pressure until 1/4 to 1/2 turn below surface, driving tang towards bottom of the hole.Remove tool and sit back on top of tang. Tap down sharply. Do not try to twist tang off. For large fine threads, use long nose pliers and pull tang out.
To insure proper installation of inserts, always use the correct and corresponding tools.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 53834 |
|---|---|
| Type | Insert Repair Kit |
| Size | 1/4-28 |
| Recommended Drill Size | 17/64 " |
| Number of Pieces | 17 |
| UNSPSC #: | 27112810 |
| TAA Compliant: | Yes |
| Weight: | 0.52 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
