3/4 Drop In Anchor
(Pack of
5)
An all-steel anchor
Use with standard bolts for flush mount applications in concrete or masonry
Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Frequently Bought Together

Light-Medium Duty Anchor Assortment 555Pcs
Couldn't load pickup availability

Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability

Hollow Wall Screw Anchor Assortment 196Pcs
Couldn't load pickup availability

Drop-In Anchor Steel 1/2 x 2"
Couldn't load pickup availability

Drop-In Anchor High Strength 5/16-18 x 2-7/16"
Couldn't load pickup availability

Drop-In Anchor High Strength 3/4-10 x 6-1/2"
Couldn't load pickup availability

Open End Rivet Large Flange Head Aluminum 3/16"
Couldn't load pickup availability

Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M8-1.25 x 40mm
Couldn't load pickup availability

Hex Head Sheet Metal Screw with 16mm Washer Steel
Couldn't load pickup availability

Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability

Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Product Description
An all-steel anchor Use with standard bolts for flush mount applications in concrete or masonry
Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
Item#: | DY09620078 |
---|---|
Diameter | 3/4 " |
Overall Length | 3-1/8 " |
Thread Pitch | 10 tpi |
Type | Expansion Drop-In Anchor |
Drill Size | 1 " |
Hole Depth | 3-1/4 " |
Minimum Spacing | 12 " |
Minimum Edge Distance | 10-1/2 " |
Allowable Tension (4,000 psi Concrete) | 2,690 lb |
Allowable Shear (4,000 psi Concrete) | 4,000 lb |
UNSPSC #: | 31162101 |
TAA Compliant: | No |
Weight: | 2.4 lb |
Product Restrictions
