5/8X2-1/2 Drop In Expansion Anchor
(Pack of
5)
SKU:DY09620076 Item#: DY09620076
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Frequently Bought Together
Double Expansion Shield Anchor Alloy Steel 5/16"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability
Drop-In Anchor High Strength 3/8-16 x 2-3/4"
Couldn't load pickup availability
Drop-In Anchor Steel 1/4 x 1"
Couldn't load pickup availability
Drop-In Anchor High Strength 1/4-20 x 1-1/2"
Couldn't load pickup availability
Hex Flange Nut Grade 10 Steel M8-1.25
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 1/8"
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M8-1.25
Couldn't load pickup availability
Hex Head Sheet Metal Screw with 17mm Washer Steel
Couldn't load pickup availability
Front License Plate to Bumper Cover Split Rivet
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | DY09620076 |
|---|---|
| Diameter | 5/8 " |
| Overall Length | 2-1/2 " |
| Thread Pitch | 11 tpi |
| Type | Expansion Drop-In Anchor |
| Drill Size | 7/8 " |
| Hole Depth | 2-1/2 " |
| Minimum Spacing | 10 " |
| Minimum Edge Distance | 8-3/4 " |
| Allowable Tension (4,000 psi Concrete) | 2,170 lb |
| Allowable Shear (4,000 psi Concrete) | 2,770 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.61 lb |
Product Restrictions
