Arrowhead Ceramic Drill Bit, Alloy Steel Shaft, Carbide-Tipped Point, 7/64" Shank, 1/8 x 2-1/8"
(Pack of
1)
SKU:29580 Item#: 29580
• Carbide-tipped point reduces cutting pressure for cleaner holes in difficult-to-cut materials
• Spear design provides clean, smooth holes without chipping or fracturing
• High-strength, special alloy steel shaft promotes longer tool life
• Use on ceramics, tile, glass, mirror, acrylic, fiberglass and most hard plastic materials
• Can be used in hand-held portable drill motors and stationary drill presses
• Not for use in hammer or percussion drills
General Operating Directions
• Before drilling, back up or support with a flat piece of similar material or wood if possible
• Use a variable speed drill motor and slow drilling speed
• When cutting glass or mirror, apply a lubricant to maximize cutting efficiency
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
5/16" Dia. Spear Point Bit, Glass, Tile, Ceramic Drill Bit
$0.00
Couldn't load pickup availability
Ceramic Drill Bit Kit 6Pcs
$0.00
Couldn't load pickup availability
Arrowhead Ceramic Drill Bit 3/16"
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3" (M10)
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Double End Drill Bit 1/8"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Small Index-Tend Pry Bar
$0.00
Couldn't load pickup availability
Comfort Grip Ergonomic Jumbo Awl, 4 pc Hook & Pick Set
$0.00
Couldn't load pickup availability
9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter
$0.00
Couldn't load pickup availability
Product Description
• Carbide-tipped point reduces cutting pressure for cleaner holes in difficult-to-cut materials• Spear design provides clean, smooth holes without chipping or fracturing
• High-strength, special alloy steel shaft promotes longer tool life
• Use on ceramics, tile, glass, mirror, acrylic, fiberglass and most hard plastic materials
• Can be used in hand-held portable drill motors and stationary drill presses
• Not for use in hammer or percussion drills
General Operating Directions
• Before drilling, back up or support with a flat piece of similar material or wood if possible
• Use a variable speed drill motor and slow drilling speed
• When cutting glass or mirror, apply a lubricant to maximize cutting efficiency
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 29580 |
|---|---|
| Type | Arrowhead Drill Bit |
| Diameter | 1/8 " |
| Decimal Equivalent | 0.1340 " |
| Overall Length | 2-1/8 " |
| Shank Size | 7/64 " |
| Steady Pressure Recommended | 300 - 500 RPM |
| Shank | Straight |
| UNSPSC #: | 23241600 |
| TAA Compliant: | Yes |
| Weight: | 0.015 lb |
Product Restrictions
