Arrowhead Ceramic Drill Bit, Alloy Steel Shaft, Carbide-Tipped Point, 11/64" Shank, 1/4 x 2-1/4"
(Pack of
1)
SKU:P62272 Item#: P62272
• Carbide-tipped point reduces cutting pressure for cleaner holes in difficult-to-cut materials
• Spear design provides clean, smooth holes without chipping or fracturing
• High-strength, special alloy steel shaft promotes longer tool life
• Use on ceramics, tile, glass, mirror, acrylic, fiberglass and most hard plastic materials
• Can be used in hand-held portable drill motors and stationary drill presses
• Not for use in hammer or percussion drills
General Operating Directions
• Before drilling, back up or support with a flat piece of similar material or wood if possible
• Use a variable speed drill motor and slow drilling speed
• When cutting glass or mirror, apply a lubricant to maximize cutting efficiency
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
1/8" Dia.Spear Point Bit, Glass, Tile, Ceramic Drill Bit
$0.00
Couldn't load pickup availability
1/4" Dia. Spear Point Bit, Glass, Tile, Ceramic Drill Bit
$0.00
Couldn't load pickup availability
1/2" Dia. Spear Point Bit, Glass, Tile, Ceramic Drill Bit
$0.00
Couldn't load pickup availability
1/8" - 1/2 " Cryonitride Spiral Fluted Step Drill - 1/4" Shank
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3" (M10)
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Double Flute Step Drill Bit 3/16 to 7/8"
$0.00
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
8Pc Metric Mini Double Head Wrench Set
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
10" Forman's Favorite Heavy-Duty Copper & Aluminum Cable Cutter Pliers
$0.00
Couldn't load pickup availability
Product Description
• Carbide-tipped point reduces cutting pressure for cleaner holes in difficult-to-cut materials• Spear design provides clean, smooth holes without chipping or fracturing
• High-strength, special alloy steel shaft promotes longer tool life
• Use on ceramics, tile, glass, mirror, acrylic, fiberglass and most hard plastic materials
• Can be used in hand-held portable drill motors and stationary drill presses
• Not for use in hammer or percussion drills
General Operating Directions
• Before drilling, back up or support with a flat piece of similar material or wood if possible
• Use a variable speed drill motor and slow drilling speed
• When cutting glass or mirror, apply a lubricant to maximize cutting efficiency
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | P62272 |
|---|---|
| Type | Arrowhead Drill Bit |
| Diameter | 1/4 " |
| Decimal Equivalent | 0.2600 " |
| Overall Length | 2-1/4 " |
| Shank Size | 11/64 " |
| Steady Pressure Recommended | 300 - 500 RPM |
| Shank | Straight |
| UNSPSC #: | 23241600 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
