Chatterless Countersink, High Speed Steel, 82° Six Flute, 710RPM, 3/4 x 2-13/16"
(Pack of
1)
SKU:57151 Item#: 57151
Centerline Angle 41°, Included Angle 82°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryocut 1/4" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 3/16" Body Dia. 82o Angle Countersink, 1-Flute
Couldn't load pickup availability
Countersink 82° Single Flute 13/16"
Couldn't load pickup availability
Countersink Drill Bit 3/32"
Couldn't load pickup availability
Chatterless Countersink 90° Six Flute 5/16"
Couldn't load pickup availability
Countersink Drill Bit 1/8"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 3/8" (M10)
Couldn't load pickup availability
E-Z Kut Reinforced Abrasive Wheel 3"
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Brown
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Wire Stripper-Cutter 6" Stainless Steel Jaws
Couldn't load pickup availability
Hex Key Set, Balldriver, Ball Hex, 9pc
Couldn't load pickup availability
Product Description
Centerline Angle 41°, Included Angle 82°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57151 |
|---|---|
| Type | Countersink |
| Body Diameter | 3/4 " |
| Flutes | Six |
| Included Angle | 82 ° |
| Shank Size | 1/2 " |
| Shank Length | 1-1/4 " |
| Overall Length | 2-13/16 " |
| For Screw Size | No. 10 - 5/16 |
| Maximum RPM (Aluminum) | 710 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 350 RPM |
| Centerline Angle | 41 ° |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.25 lb |
Product Restrictions
