Chatterless Countersink 82° Six Flute 5/16"
(Pack of
1.0)
Centerline Angle 41°, Included Angle 82°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Chatterless Countersink 82° Single Flute 1/2"
Couldn't load pickup availability
Cryocut 3/8" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 3/8"
Couldn't load pickup availability
Countersink 82° Single Flute 1-1/8"
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 3/16"
Couldn't load pickup availability
Cryocut 1" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Twist-On Surface Conditioning Disc 2" Maroon
Couldn't load pickup availability
Jobber Length Drill Bit HSS 6.5mm
Couldn't load pickup availability
Steel Crimped Cup Brush 1-3/4"
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 5/32"
Couldn't load pickup availability
Product Description
Centerline Angle 41°, Included Angle 82°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57143 |
|---|---|
| Type | Countersink |
| Body Diameter | 5/16 " |
| Flutes | Six |
| Included Angle | 82 ° |
| Shank Size | 1/4 " |
| Shank Length | 1 " |
| Overall Length | 2 " |
| For Screw Size | No. 3 - No. 5 |
| Maximum RPM (Aluminum) | 1,710 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 850 RPM |
| Centerline Angle | 41 ° |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.004 lb |
Product Restrictions
