Countersink for Chamfering or Deburring, 82° Single End Single Flute, #1 to #10 Screws, 7/16 x 2"
(Pack of
1)
SKU:97621 Item#: 97621
• 82° included angle
• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryocut 5/8" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 3/4" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 3/16"
Couldn't load pickup availability
Cryocut 5/8" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 3/16" Body Dia. 100o Angle Countersink, 1-Flute
Couldn't load pickup availability
Cryocut 1" Body Dia. 100o Angle Countersink, 3-Flute
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Abrasive Hand Pad All Purpose 6 x 9"
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
Couldn't load pickup availability
Product Description
• 82° included angle• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97621 |
|---|---|
| Type | Countersink |
| Body Diameter | 7/16 " |
| Flutes | Single |
| Included Angle | 82 ° |
| Shank Size | 1/4 " |
| Overall Length | 2 " |
| For Screw Size | No. 1 - No. 10 |
| Cutting Diameter Min. | 0.15 " |
| Cutting Diameter Max. | 0.40 " |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.05 lb |
Product Restrictions
