Chatterless Countersink, High Speed Steel, 90° Six Flute, 530RPM, 1 x 2-13/16"
(Pack of
1)
SKU:57154 Item#: 57154
Centerline Angle 45°, Included Angle 90°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
45° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryocut 1/2" Body Dia. 90o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Cryocut 5PC Set, 90o Angle Countersink, 3-Flute, W/ Storage Box
$0.00
Couldn't load pickup availability
Chatterless Countersink 90° Six Flute 1/2"
$0.00
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 90o Angle Countersink, 1-Flute
$0.00
Couldn't load pickup availability
Chatterless Countersink Kit 4Pcs 82° Single Flute
$0.00
Couldn't load pickup availability
Cryocut 3/4" Body Dia. 90o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)
$0.00
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Wheel Opening Drive Rivet Aluminum 5/32"
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
10Pc SAE Mini Combination Wrench Set
$0.00
Couldn't load pickup availability
1/8" - 1/2 " Cryonitride Spiral Fluted Step Drill - 1/4" Shank
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit
$0.00
Couldn't load pickup availability
Product Description
Centerline Angle 45°, Included Angle 90°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
45° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57154 |
|---|---|
| Type | Countersink |
| Body Diameter | 1 " |
| Flutes | Six |
| Included Angle | 90 ° |
| Centerline Angle | 45 ° |
| Shank Size | 1/2 " |
| Shank Length | 1-1/4 " |
| Overall Length | 2-13/16 " |
| For Screw Size | No. 12 - 1/2 |
| Maximum RPM (Aluminum) | 530 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 260 RPM |
| Material | M2 High Speed Steel |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.34 lb |
Product Restrictions
