Colorstar Crunch Interior Mat, Quartz, 4' Wide x 10' Long
(Pack of
1)
SKU:1317543 Item#: 1317543
The ColorStar Crunch mats unites high twist solution dyed nylon fiber with abrasive solution dyed fibers resulting in a mat with excellennt wiping and scraping features. The solution dyed nylon fiber is also highly resistant to fading to UV exposure.
FEATURES
• Extra course solution-dyed nylon fibers in combination with traditional solution-dyed fibers create excellent scraping and wiping action for maximum soil stopping power.
• Solution-dyed yarn is easy to clean. Just rinse with soap and water. You may even use bleach on heavy soil areas to help remove stains.
• High twist and heat-set anti-static nylon yarn makes ColorStar Crunch safe to use around sensitive electronic equipment.
• Green friendly rubber backing has 20% recycled rubber content.
• Intricate tweed-color patterns helps hide soil.
• Certified slip-resistant by the National Floor Safety Institute.
• Recommended uses malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
• SURFACE
• FIBER TYPE: Solution-dyed BCF nylon, combined with extra course solution dyed nylon
• WEIGHT: 27 ozs/sy.
• PILE HEIGHT: 1/4"
• GUAGE: 5/32"
• CONSTRUCTION: Cut Pile
• BACKING
• TYPE: 100% NItrile Rubber
• THICKNESS: .060"- Body
•DUROMETER: 65
• TENSIL: 1800 PSI
• TESTING
• Passes Flammability Standard DOC-FF-1-70
• Passes AATCC Test Method 134-1991 Electrostatic Propensity of Carpets Maximum Voltage negative 1.0 KV
• Anti-Static
1. Vacuum Daily
•When possible, mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance
•Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning
•Mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation
•Prior to the mat being put back into service, it's recommended that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Product Description
The ColorStar Crunch mats unites high twist solution dyed nylon fiber with abrasive solution dyed fibers resulting in a mat with excellennt wiping and scraping features. The solution dyed nylon fiber is also highly resistant to fading to UV exposure.FEATURES
• Extra course solution-dyed nylon fibers in combination with traditional solution-dyed fibers create excellent scraping and wiping action for maximum soil stopping power.
• Solution-dyed yarn is easy to clean. Just rinse with soap and water. You may even use bleach on heavy soil areas to help remove stains.
• High twist and heat-set anti-static nylon yarn makes ColorStar Crunch safe to use around sensitive electronic equipment.
• Green friendly rubber backing has 20% recycled rubber content.
• Intricate tweed-color patterns helps hide soil.
• Certified slip-resistant by the National Floor Safety Institute.
• Recommended uses malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
• SURFACE
• FIBER TYPE: Solution-dyed BCF nylon, combined with extra course solution dyed nylon
• WEIGHT: 27 ozs/sy.
• PILE HEIGHT: 1/4"
• GUAGE: 5/32"
• CONSTRUCTION: Cut Pile
• BACKING
• TYPE: 100% NItrile Rubber
• THICKNESS: .060"- Body
•DUROMETER: 65
• TENSIL: 1800 PSI
• TESTING
• Passes Flammability Standard DOC-FF-1-70
• Passes AATCC Test Method 134-1991 Electrostatic Propensity of Carpets Maximum Voltage negative 1.0 KV
• Anti-Static
1. Vacuum Daily
•When possible, mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance
•Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning
•Mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation
•Prior to the mat being put back into service, it's recommended that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Technical Specifications
| Item#: | 1317543 |
|---|---|
| Manufacturer Model #: | 109 |
| Size | 4 x 10 ft |
| Color | Quartz |
| Style | Colorstar Crunch |
| Length | 10 ft |
| Width | 4 ft |
| Weight | 25 lb |
| Shape | Rectangular |
| Backing Material | SBR Rubber |
| Backing Style | Smooth |
| Border Style | Rubber |
| Type | Safety Matting |
| Applications | Indoor Wiper Mat |
| Quantity Per Package | 1.0000 |
| UNSPSC #: | 52101508 |
| TAA Compliant: | Yes |
