12-Point Flange Counterbore Screw, Alloy Steel, Plain Finish, Coarse Thread, 5/16-18 x 1/2"
(Pack of
50)
SKU:85284 Item#: 85284
• Countr-Bor Screws generate higher clamp loads because they are torqued through an external drive (socket); standard hex socket head screws are torqued by an internal drive (hex key)
• Heat-treated alloy steel
• Class 3A UNC threads
• Tensile strength: 180,000 PSI (up to and including 1/2" dia.); 170,000 PSI (over 1/2" dia.)
• ANSI Specification B1.1
• All dimensional properties meet IFI-115 and SAE J58 specifications
• Lawson Countr-Bor Screws can replace any standard hex socket head screw
• 12-point screw fits into same counter-bore hole – use standard 12 point socket
NOTE: Use a wrench or socket size which corresponds to the diameter of the screw. For example, a 5/16" dia. screw is installed by using a 5/16", 12 point standard socket.
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M10-1.25 x 16mm
$0.00
Couldn't load pickup availability
Hex Cap Screw Grade 8 1/4-20 x 1"
$0.00
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M10-1.5 x 40mm
$0.00
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 5/16"
$0.00
Couldn't load pickup availability
DIN 9021B Fender Washer Low Carbon Steel 18mm
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1"
$0.00
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M12-1.75 x 40mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 20mm
$0.00
Couldn't load pickup availability
Counterbore Screw 7/16-14 x 2-1/2"
$0.00
Couldn't load pickup availability
DIN 6921 Hex Flange Bolt Grade 8.8 M8-1.25 x 20mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 25mm
$0.00
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1-1/4"
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
3" Partsmaster Type R Surface Conditioning Disk-Coarse
$0.00
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon Red
$0.00
Couldn't load pickup availability
Rocker and Quarter Molding Retainer Plastic
$0.00
Couldn't load pickup availability
3" Partsmaster Type R Surface Conditioning Disk-Coarse
$0.00
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon Red
$0.00
Couldn't load pickup availability
Rocker and Quarter Molding Retainer Plastic
$0.00
Couldn't load pickup availability
Product Description
• Countr-Bor Screws generate higher clamp loads because they are torqued through an external drive (socket); standard hex socket head screws are torqued by an internal drive (hex key)• Heat-treated alloy steel
• Class 3A UNC threads
• Tensile strength: 180,000 PSI (up to and including 1/2" dia.); 170,000 PSI (over 1/2" dia.)
• ANSI Specification B1.1
• All dimensional properties meet IFI-115 and SAE J58 specifications
• Lawson Countr-Bor Screws can replace any standard hex socket head screw
• 12-point screw fits into same counter-bore hole – use standard 12 point socket
NOTE: Use a wrench or socket size which corresponds to the diameter of the screw. For example, a 5/16" dia. screw is installed by using a 5/16", 12 point standard socket.
Technical Specifications
| Item#: | 85284 |
|---|---|
| Type | Counter-Bor |
| Diameter | 5/16 " |
| Thread Pitch | 18 |
| Thread | Coarse |
| Length | 1/2 " |
| Finish | Plain |
| Material | Alloy Steel |
| Head Style | 12-Point Flange |
| Size | 5/16-18 " |
| Specifications | IFI-115 |
| Tensile Strength | 180,000 PSI |
| UNSPSC #: | 31161620 |
| TAA Compliant: | Yes |
| Weight: | 0.92 lb |
