DOT Air Brake Compression Nut for Nylon Tubing, Brass, 1/2"
(Pack of
5)
Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
Meets D.O.T. FMVSS 571.106
Temperature range: 40°F to +200°F (40°C to +93°C)
Exceeds pressure requirements of automotive air brake systems
Typical applications include air brake systems, air control and gauge lines
Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
Parker DOT Compression - Nylon Tubing Union 5/8x5/8
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Run Tee 1/4x1/8x1/4
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 5/8 x 3/4"
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 5/8 x 3/4"
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Connector 1/4x1/4
Couldn't load pickup availability
DOT Compression Connector Female Brass 3/8 x 1/8"
Couldn't load pickup availability
Air Conditioning Slim Line Sealing Washer
Couldn't load pickup availability
Silicone Coolant/Heater Hose Clamp 7/16 to 25/32"
Couldn't load pickup availability
Hose Connector Vacuum Line Cap 3/8" ID
Couldn't load pickup availability
DOT Compression Elbow Male 90° Brass 3/8 x 1/8"
Couldn't load pickup availability
Hose Clamp 301 SS 11/16 to 1-1/2"
Couldn't load pickup availability
Miniature Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Shroud Insulating Button Nylon 11/16"
Couldn't load pickup availability
Product Description
Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing Meets D.O.T. FMVSS 571.106
Temperature range: 40°F to +200°F (40°C to +93°C)
Exceeds pressure requirements of automotive air brake systems
Typical applications include air brake systems, air control and gauge lines
Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 84328 |
|---|---|
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Nut |
| Connection Type A | Tube |
| Fitting Dimension A | 1/2 " |
| Size | 1/2 |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.27 lb |
Product Restrictions
