DOT Air Brake Compression Sleeve for Nylon Tubing, Brass, 3/8"
(Pack of
10)
SKU:84322 Item#: 84322
Create secure, leak-proof connections effortlessly with our brass compression sleeve. Designed for use with copper, brass, and aluminum tubing, this DOT fitting sleeve works seamlessly with a compression nut and fitting to form a watertight seal in low-pressure systems like air, oil, and water lines. Its innovative design eliminates the need for flaring tools—just tighten the nut, and the sleeve locks snugly between the fitting body and nut for a dependable seal. Perfect for plumbing, fuel lines, and various industrial applications, it’s your go-to solution for reliable and efficient pipe connections.
• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Frequently Bought Together
DOT Transmission Connector Male Brass 1/16 x 5/32"
Couldn't load pickup availability
DOT Transmission Connector Male Brass 1/16 x 1/8"
Couldn't load pickup availability
Air Brake Tank Filler Valve Brass 1/4-18
Couldn't load pickup availability
Parker DOT PTC Male Swivel Elbow 90 Degrees 5/8x3/8
Couldn't load pickup availability
DOT Elbow Male 45° Brass 1/4 x 1/8-27
Couldn't load pickup availability
DOT Connector Male Brass 1/4 x 1/8-27
Couldn't load pickup availability
Slotted Hex Head Hose Clamp 301 SS 9/16 to 1-1/4"
Couldn't load pickup availability
Fuel Line Hose 3/8" ID x 25'
Couldn't load pickup availability
Miniature Clamp SS 7/32 to 5/8"
Couldn't load pickup availability
Hose Clamp 301 SS 9/16 to 1-1/16"
Couldn't load pickup availability
FLEXAIR 3/8" I.D. x 25' air hose
Couldn't load pickup availability
FLEXAIR 3/8" I.D. x 50' air hose assembly w/ Industrial safety coupler
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Product Description
Create secure, leak-proof connections effortlessly with our brass compression sleeve. Designed for use with copper, brass, and aluminum tubing, this DOT fitting sleeve works seamlessly with a compression nut and fitting to form a watertight seal in low-pressure systems like air, oil, and water lines. Its innovative design eliminates the need for flaring tools—just tighten the nut, and the sleeve locks snugly between the fitting body and nut for a dependable seal. Perfect for plumbing, fuel lines, and various industrial applications, it’s your go-to solution for reliable and efficient pipe connections.• Fittings are shipped with nuts, sleeves and inserts preassembled, ready to slip onto tubing
• Meets D.O.T. FMVSS 571.106
• Temperature range: –40°F to +200°F (–40°C to +93°C)
• Exceeds pressure requirements of automotive air brake systems
• Typical applications include air brake systems, air control and gauge lines
• Used with nylon tubing (SAE J844, Type 3)
Assembly Instructions
1. Cut tubing squarely.
2. Insert tubing into fitting until bottomed on seat.
3. Tighten nut with wrench until one thread remains visible on the fitting body; or, the nut should be screwed down finger-tight, then wrench-tightened as indicated in the table (this will allow for a number of remakes).
Technical Specifications
| Item#: | 84322 |
|---|---|
| Fitting Type | Compression - Nylon |
| Style | DOT |
| Material | Brass |
| Configuration | Compression Sleeve |
| Connection Type A | Tube |
| Fitting Dimension A | 3/8 " |
| Size | 3/8 |
| Type | Compression |
| UNSPSC #: | 25171700 |
| TAA Compliant: | No |
| Weight: | 0.05 lb |
Product Restrictions
