Home Discontinued Drive Anchor
Discontinued
DV_ZoomOriginal_P_9046_WB.jpg
DV_ZoomOriginal_P_9046_WB.jpg

Drive Anchor For Concrete, Alloy Steel, Zinc Finish 1/4" x 2-1/2"
(Pack of 25)

Item#: 64553

Kent Automotive

• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.

Read More
Check Availability
Usually Ships: Today
While Supplies Last

Frequently Bought Together

DV_ZoomOriginal_I_P15600.jpg

Bumper Push-Type Retainer Nylon 18mm

Item#: P15600
DV_ZoomOriginal_I_P85262.jpg

Bumper Radiator and Grille Drive Rivet 7mm Hole

Item#: P85262
DV_ZoomOriginal_I_1468633.jpg

Push-Type Retainer Nylon 16 x 19mm

Item#: 1468633

Product Description

• Made of high-strength heat-treated alloy steel with zinc plating
• Flat head style
• Works best when countersunk
• Same size hole diameter as anchor diameter
• Dead loads only
• Meets GSA Specification FF-325C, Group VI
1. Using 1/4" carbide bit, drill hole at least 1/4" deeper than anchor embedment. Clean hole of debris.
2. To set, drive anchor into hole through item to be fastened.

Technical Specifications

Item#: 64553
Diameter 1/4 "
Length 2-1/2 "
Hole Diameter 1/4 "
Type Drive Anchors
Minimum Embedment 1-1/8 "
Material Steel
Ultimate Load In 3,000 PSI Concrerte 2,010 lb
Finish Zinc
UNSPSC #: 31162101
TAA Compliant: Yes
Weight: 0.94 lb

Suggested Products

Your Recently Viewed Items