Hollow Wall Screw Anchor, Steel, Zinc Finish, Long Style, 7/16" Drill Size, 1/4-20
(Pack of
50)
SKU:25177 Item#: 25177
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
One-Piece Anchor Nylon 1/4 x 1"
$0.00
Couldn't load pickup availability
Conical Screw Anchor Plastic #6 to #8 x 3/4"
$0.00
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 5/32"
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
$0.00
Couldn't load pickup availability
Rear Bumper Cover Retainer Plastic 18mm
$0.00
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
$0.00
Couldn't load pickup availability
One-Piece Anchor Nylon 1/4 x 1"
$0.00
Couldn't load pickup availability
Conical Screw Anchor Plastic #6 to #8 x 3/4"
$0.00
Couldn't load pickup availability
Small Diameter Screw Anchor 1/8 to 1/4" Grip
$0.00
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25177 |
|---|---|
| Length | 2-7/8 " |
| Type | Wall Anchor |
| Body Diameter | 3/8 " |
| Diameter | 1/4 " |
| Material | Steel |
| Screw Diameter | 1/4-20 Long |
| Finish | Zinc |
| Drill Size | 7/16 " |
| Anchor Size | 1/4 x 2-7/8 " |
| Minimum Wall Thickness | 5/8 " |
| Maximum Wall Thickness | 1-1/4 " |
| Screw Length | 2-1/2 " |
| Wall Thickness | 5/8 to 1-1/4 " |
| Sleeve Length | 7/8 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 2.96 lb |
