Hollow Wall Screw Anchor, Steel, Zinc Finish, Short Style, 1/8"
(Pack of
50)
Zinc rust-resistant finish
Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Masonry Sleeve Anchor Steel 1/4 x 2-1/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 1/4 x 1"
Couldn't load pickup availability
Masonry Anchor Star Head Steel 1/4 x 1-3/4"
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M8-1.25
Couldn't load pickup availability
Self-Drilling Screw Hex Head #8-18 x 1/2"
Couldn't load pickup availability
Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability
Shroud Insulating Button Nylon 11/16"
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Hollow Wall Anchor Setting Tool
Couldn't load pickup availability
Tubular Anchor Plastic White #4 to #6
Couldn't load pickup availability
SNAPTOGGLE® Toggle Bolt Anchor 3/16-24
Couldn't load pickup availability
Product Description
Zinc rust-resistant finish Dual head Phillips/slotted
1. Place fastener against wall and drive in with hammer. Stop when flange rests against the face of the wall.
2. Turn screw with screwdriver anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 91613 |
|---|---|
| Type | Wall Anchor |
| Size | 1/8 " |
| Body Diameter | 1/8 " |
| Diameter | 1/8 " |
| Material | Steel |
| Finish | Zinc |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 1/2 " |
| Wall Thickness | 1/8 to 1/2 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.73 lb |
Product Restrictions
