Hollow Wall Screw Anchor, Steel, Zinc Finish, Short Style, 3/8" Drill Size, #10-24
(Pack of
50)
SKU:25173 Item#: 25173
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Toggle Bolt Anchor Assortment 70Pcs
$0.00
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Assortment 283Pcs
$0.00
Couldn't load pickup availability
Standard Self-Drilling Wallboard Anchor Kit 41Pcs
$0.00
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M8
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 16mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
$0.00
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #4 to #10
$0.00
Couldn't load pickup availability
Arrow Point Drywall Anchor Steel #8
$0.00
Couldn't load pickup availability
Hollow Wall Screw Anchor Extra Short Style # 6-32
$0.00
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25173 |
|---|---|
| Length | 3-3/8 " |
| Type | Wall Anchor |
| Body Diameter | 5/16 " |
| Diameter | 3/16 " |
| Material | Steel |
| Screw Diameter | 10-24 (3/16) Short |
| Finish | Zinc |
| Drill Size | 3/8 " |
| Anchor Size | 3/16 x 3-3/8 " |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 5/8 " |
| Screw Length | 2 " |
| Wall Thickness | 1/8 - 3/4 " |
| Sleeve Length | 3/8 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 1.54 lb |
