Hollow Wall Screw Anchor Extra Short Style # 6-32
(Pack of
100.0)
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Light-Medium Duty Anchor Assortment 555Pcs
Item#: LP330BL
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
Item#: LP727BL
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Item#: LP469
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 30mm
Item#: 28682
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
Item#: 55609
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 35mm
Item#: 28688
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Item#: P86111
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Item#: KT13527
Couldn't load pickup availability
Wheel House Molding Split Rivet Aluminum 3/16"
Item#: P68087
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"
Item#: 25145
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 3"
Item#: 25149
Couldn't load pickup availability
Tubular Anchor Plastic Blue #13 to #15
Item#: 25120
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 91612 |
|---|---|
| Type | Wall Anchor |
| Body Diameter | 7/32 " |
| Diameter | 1/8 " |
| Material | Steel |
| Screw Diameter | 6-32 (1/8) Extra Short |
| Finish | Zinc |
| Drill Size | 5/16 " |
| Minimum Wall Thickness | 0 " |
| Maximum Wall Thickness | 1/4 " |
| Screw Length | 1 " |
| Wall Thickness | 0 to 3/16 " |
| Sleeve Length | 11/64 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.91 lb |
Product Restrictions
