Hollow Wall Screw Anchor Steel Short Style #6-32
(Pack of
100.0)
• Zinc rust-resistant finish
1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Item#: 25219
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Item#: 91597
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 1-7/8"
Item#: 25210
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Item#: FA88435
Couldn't load pickup availability
Conversion Kit #10-32
Item#: 84225
Couldn't load pickup availability
Hex Cap Screw Property Class 10.9 M6-1 x 16mm
Item#: 62680
Couldn't load pickup availability
Wheel Flare Molding Clip with Sealer Nylon
Item#: KT13688
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
Item#: P23453
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Item#: P67286
Couldn't load pickup availability
Wing Type Toggle Bolt Round Head 1/4-20 x 6"
Item#: 91640
Couldn't load pickup availability
Pin Drive Anchor Mushroom Head Nylon 1/4 x 1/2"
Item#: 92061
Couldn't load pickup availability
Wing Type Toggle Bolt Round Head #10-24 x 6"
Item#: 91638
Couldn't load pickup availability
Product Description
• Zinc rust-resistant finish1. Drill hole recommended diameter. Push anchor into hole and tap until flush with wall surface.
2. Turn screw with screwdriver – anchor will expand and hold firmly.
3. Remove screw, place fixture over anchor, place screw through fixture and anchor, tighten.
NOTE: Holding power is dependent on the strength of wall material.
Technical Specifications
| Item#: | 25170 |
|---|---|
| Length | 1-5/8 " |
| Type | Wall Anchor |
| Body Diameter | 7/32 " |
| Diameter | 1/8 " |
| Material | Steel |
| Screw Diameter | 6-32 (1/8) Short |
| Finish | Zinc |
| Drill Size | 5/16 " |
| Anchor Size | 1/8 x 1-5/8 " |
| Minimum Wall Thickness | 1/8 " |
| Maximum Wall Thickness | 1/2 " |
| Screw Length | 1-1/2 " |
| Wall Thickness | 1/8 to 5/8 " |
| Sleeve Length | 13/32 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 1.13 lb |
Product Restrictions
