Masonry Anchor Phillips Head #14-10 x 2-3/4"
(Pack of
25)
Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick
Fast installation drill hole, drive anchor
Available in two head styles hex washer head for most applications and Phillips flat head for countersunk applications
Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Frequently Bought Together

Conical Screw Anchor Kit Plastic 101Pcs
Couldn't load pickup availability

E-Z Anchor Kit Steel 41Pcs
Couldn't load pickup availability

Conical Screw Anchor Kit Plastic 201Pcs
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M6-1 x 20mm
Couldn't load pickup availability

DIN 125A Flat Washer Grade 140 HV M8
Couldn't load pickup availability

Drill 'N Drive Masonry Anchor Setting Tool
Couldn't load pickup availability

Masonry Anchor Hex Washer Head Steel 3/16 x 1-1/4"
Couldn't load pickup availability

Drill 'N Drive Anchor Masonry Anchor Drill Bit
Couldn't load pickup availability

Rocker Molding Clip with Sealer Nylon Blue 17mm
Couldn't load pickup availability

Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability

Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Product Description
Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick Fast installation drill hole, drive anchor
Available in two head styles hex washer head for most applications and Phillips flat head for countersunk applications
Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Technical Specifications
Item#: | 59664 |
---|---|
Diameter | #14 |
Length | 2-3/4 " |
Type | Crete-Flex |
Material | Stainless Steel |
Finish | Plain |
Thread Pitch | 10 tpi |
Drive | Phillips |
Head Style | Phillips Flat Head |
Drive Style | Phillips |
UNSPSC #: | 31162104 |
TAA Compliant: | Yes |
Weight: | 0.76 lb |
Product Restrictions


