Spiral Point Hand Tap, High Speed Steel, 3 Flute, M12 x 1.75, 3-3/8" Overall Length
(Pack of
1)
SKU:63501 Item#: 63501
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap
• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3" (M10)
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 5-40
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M18 x 1.5 Starter Hand Tap
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M16 x 1.5 Starter Hand Tap
$0.00
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M4 x 0.7
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M12 x 1.75
$0.00
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 3/8-16
$0.00
Couldn't load pickup availability
8Pc Metric Mini Double Head Wrench Set
$0.00
Couldn't load pickup availability
Jobber Length Drill Bit HSS 6.5mm
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Product Description
• Spiral point design has a left hand flute at the point to provide a positive rake and drive the chip ahead of the tap• Shorter overall thread length minimizes drag after the first full thread
• Reduced neck provides clearance to prevent breakage and allows room for lubrication to reach cutting edge
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Three flutes stabilize starting direction to facilitate tapping straight holes
• Manufactured from high-speed steel
• Recommended for through holes in most materials
• Designed for tapping on machining centers
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63501 |
|---|---|
| Type | Metric |
| Diameter | M12 |
| Pitch | 1.75 mm |
| Flutes | 3 |
| Material | HSS |
| Overall Length | 3-3/8 " |
| Recommended Drill Size | Yes |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.11 lb |
