Pilotdrive Cryotap #10-24 Starter Hand Tap
(Pack of 1)

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Check Availability

Quantity

Frequently Bought Together

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300

Scotch-Brite Roloc Bristle Disc 2"

Reinforced Mini Cut-Off Wheel 4"

Megaspansion II Gray

Item#: EG57563301

Cut-Off Wheel Dispenser For 4-1/2" Diameter Wheels-Kent

Adhesive-Back Shim Stock 5/16 x 1/2" x 30'

Nylon Cable Tie 7-1/2" Black

Bumper Drive Rivet Plastic 10mm Hole

Molding Clip with Sealer Nylon White 11.5 x 21

HSS Spiral Point Hand Tap 6-32

Pilotdrive Cryotap 1/4"-20 Starter Hand Tap

Item#: DY80635009

HSS Spiral Point Hand Tap 1-14

4-Flute HSS Hand Tap Kit M18 x 2.5

4-Flute HSS Hand Tap Kit M16 x 2

Cryotap 1/2"-13 Tri-Pak

Item#: DY80692902

Spot Weld Remover Drill Bit 5/16" (M8)

18V Impact Wrench Kit

E-Z Kut Reinforced Abrasive Wheel 3"

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#:	DY80635005
Type	Machine Screw
Diameter	#10
Pitch	24
Flutes	4
Thread Length	1/2 "
H Limits	H3
Overall Length	2-3/8 "
Recommended Drill Size	No. 25
UNSPSC #:	23241615
TAA Compliant:	No
Weight:	0.02 lb

Product Restrictions

Suggested Products

Spot Weld Remover Drill Bit HSS 2-13/16(M8)

Sheet Metal Drill Bit Alloy Steel 1/8"

Spot Weld Remover Drill Bit HSS 1/4" (M6)

Spot Weld Remover Drill Bit HSS 3/8" (M10)

Abrasive Hand Pad All Purpose 6 x 9"

Twist-On Abrasive Disc 2"

Sheet Metal Drill Bit Alloy Steel 1/4"

Sheet Metal Drill Bit Alloy Steel 3/16"

Scotch-Brite Roloc Bristle Disc 2"

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Scotch-Brite Roloc Bristle Disc 2"

Aluminum Oxide Grain Locking Grinding Disc 2"

Your Recently Viewed Items