IFI 100/107 Top Locknut, Grade C, Alloy Steel, Zinc/Wax Finish, Fine Thread, 1.176" Thickness, 1-11/16" Across Flats, 1-1/8-12
(Pack of
10)
SKU:80949 Item#: 80949
• Heat-treated for matched strength
• Will not loosen even under severe vibration
• Locking torque is retained for a minimum of five reapplications
• 150,000 PSI minimum proof strength
• Meets IFI and ANSI specifications
• Developed for Grade 8 applications
• Designed for use with Tuff-Torq® Cap Screws
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut
*Collar Style
NOTE: Not recommended for use above 450°F (232°C).
For recommended torque values, see Lawson’s E546 brochure.
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M6-1 x 12mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 25mm
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
$0.00
Couldn't load pickup availability
Flange Locknut with Nylon Insert Grade 8 3/8-16
$0.00
Couldn't load pickup availability
Locknut with Nylon Insert 316 SS #6-32
$0.00
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade A 1/2-13
$0.00
Couldn't load pickup availability
Hex Nut Grade 10 Alloy Steel M6-1
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M5-0.8
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel 1/4-20
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M12-1.75
$0.00
Couldn't load pickup availability
Hex Flange Nut Grade 8 Steel M8-1.25
$0.00
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Product Description
• Heat-treated for matched strength• Will not loosen even under severe vibration
• Locking torque is retained for a minimum of five reapplications
• 150,000 PSI minimum proof strength
• Meets IFI and ANSI specifications
• Developed for Grade 8 applications
• Designed for use with Tuff-Torq® Cap Screws
• Identified by six symmetrically spaced marks on the chamfered surface on the top of the nut
*Collar Style
NOTE: Not recommended for use above 450°F (232°C).
For recommended torque values, see Lawson’s E546 brochure.
Technical Specifications
| Item#: | 80949 |
|---|---|
| Diameter | 1-1/8 " |
| Thread Pitch | 12 |
| Grade | C |
| Finish | Zinc/Wax |
| Type | Top Lock Nut |
| Material | Alloy Steel |
| Thickness | 1.176 " |
| Across Flats | 1-11/16 " |
| Thread | Fine |
| Specifications | IFI 100/107 |
| Maximum Temperature | 450º F |
| Proof | 150,000 PSI |
| Quantity Per Package | 10.0000 |
| UNSPSC #: | 31161716 |
| TAA Compliant: | No |
| Weight: | 3.59 lb |
Product Restrictions
