Masonry Anchor, Hex Washer Head, Type 410 Stainless Steel, Stalgard Coated, #14-10 x 2-1/4"
(Pack of
25)
SKU:59657 Item#: 59657
• Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick
• Fast installation – drill hole, drive anchor
• Available in two head styles – hex washer head for most applications and Phillips flat head for countersunk applications
• Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Frequently Bought Together
Wallboard Anchor Assortment
Couldn't load pickup availability
Anchor Kit Steel 103Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 700Pcs
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 30mm
Couldn't load pickup availability
Masonry Anchor Phillips Head #14-10 x 2-3/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 5/16 x 1-3/4"
Couldn't load pickup availability
Masonry Anchor Phillips Head #14-10 x 2-1/4"
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
Couldn't load pickup availability
Fender Apron Drive Rivet 8mm Hole
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Product Description
• Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick• Fast installation – drill hole, drive anchor
• Available in two head styles – hex washer head for most applications and Phillips flat head for countersunk applications
• Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Technical Specifications
| Item#: | 59657 |
|---|---|
| Diameter | #14 |
| Length | 2-1/4 " |
| Type | Crete-Flex |
| Material | Stainless Steel |
| Finish | Plain |
| Thread Pitch | 10 tpi |
| Drive | Hex |
| Head Style | Hex Washer Head |
| Drive Style | Hex |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 0.67 lb |
Product Restrictions
