Mini Self-Drilling Wall Anchor Steel 1-1/4"
(Pack of
25)
• One-piece anchor for mounting to drywall
• No pre-drilling or hole preparation
• Installs with little effort, using a #2 or #3 Phillips screwdriver or Power Driver
• Made from 100% zinc, die-cast for exceptional corrosion resistance
• Bugle head seats flush and is easily hidden behind brackets, fixtures and electronic devices
• Versatile internal core design allows use of No. 6 or No. 8 sheet metal screws and No. 6, No. 7 or No. 8 drywall screws
1. Place #2 Phillips screwdriver in recess of E-Z Anchor.
2. Drive E-Z Anchor into wall until flush with surface.
3. Place fixture over anchor, and drive screw with screwdriver.
4. Tighten fixture into place. (Minimum of 1" thread engagement is recommended for anchor.)
NOTE: Screw length is determined by adding 1" to the thickness of the fixture to be attached.
Frequently Bought Together
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 50mm
Couldn't load pickup availability
Acorn Nut A2 Stainless Steel M6-1
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
Wheel House Molding Split Rivet Aluminum 3/16"
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #6 to 5/16"
Couldn't load pickup availability
Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/2"
Couldn't load pickup availability
ALLIGATOR® Anchor Nylon #6 to #10
Couldn't load pickup availability
Product Description
• One-piece anchor for mounting to drywall• No pre-drilling or hole preparation
• Installs with little effort, using a #2 or #3 Phillips screwdriver or Power Driver
• Made from 100% zinc, die-cast for exceptional corrosion resistance
• Bugle head seats flush and is easily hidden behind brackets, fixtures and electronic devices
• Versatile internal core design allows use of No. 6 or No. 8 sheet metal screws and No. 6, No. 7 or No. 8 drywall screws
1. Place #2 Phillips screwdriver in recess of E-Z Anchor.
2. Drive E-Z Anchor into wall until flush with surface.
3. Place fixture over anchor, and drive screw with screwdriver.
4. Tighten fixture into place. (Minimum of 1" thread engagement is recommended for anchor.)
NOTE: Screw length is determined by adding 1" to the thickness of the fixture to be attached.
Technical Specifications
| Item#: | 98669 |
|---|---|
| Type | Wall Anchor |
| Material | Steel |
| Pullout Ultimate Average Lbs.Drywall Thickness 5/8" | 50 |
| Shear Ultimate Average Lbs.Drywall Thickness 1/2" | 110 lb |
| Shear Ultimate Average Lbs.Drywall Thickness 3/8" | 3/8" - 90 Lbs., 1/2" - 110 Lbs., 5/8" - 140 Lbs. lb |
| Pullout Ultimate Average Lbs.Drywall Thickness 3/8" | 3/8" - 30 Lbs., 1/2" - 40 Lbs., 5/8" - 50 Lbs. |
| Pullout Ultimate Average Lbs.Drywall Thickness 1/2" | 40 |
| Pullout Ultimate Average Lbs. | 50 |
| Shear Ultimate Average | 140 lb |
| Shear Ultimate Average Lbs.Drywall Thickness 5/8" | 140 lb |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.2 lb |
Product Restrictions
