Multi Material Screw Counter Bore #6 x 1"
(Pack of
100.0)
• Double-angled tapered point penetrates and pulls screw into material without drilling a pilot hole in wood and sheet metal. A pilot hole is required in masonry*
• Patented serrated threads self-drill into a variety of materials
• Dual-angled countersink reduces wood splitting
• Resisto-Plate™ TF for corrosion protection
• Phillips and Square Drive
• Ideal for hard and soft woods, particleboard, sheet metal up to 24 Ga., masonry, cement block, brick, adobe and stucco (Longer length screws may require a pilot hole in hard woods.)
*Dia. No. 8 – use 1/8" drill size
Dia. No. 10 – use 5/32" drill size
Dia. 1/4" – use 3/16" drill size
No anchor required. (Use rotary drill mode only for hollow block.)
Frequently Bought Together
Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability
Sheet Metal Screw Phillips Truss Head #14 x 3/4"
Couldn't load pickup availability
Self-Drilling Screw Phillips #10-16 x 3/4"
Couldn't load pickup availability
Multi Material Screw Counter Bore #10 x 3-1/2"
Couldn't load pickup availability
Multi Material Screw Counter Bore #8 x 2-1/2"
Couldn't load pickup availability
Multi Material Screw Counter Bore #10 x 1-1/4"
Couldn't load pickup availability
Hex Washer Head Self-Drilling Screw Assortment
Couldn't load pickup availability
Self-Drilling Screw Assortment Hex Head 650Pcs
Couldn't load pickup availability
Hex Washer Head Self-Drilling Screw Assortment
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Product Description
• Double-angled tapered point penetrates and pulls screw into material without drilling a pilot hole in wood and sheet metal. A pilot hole is required in masonry*• Patented serrated threads self-drill into a variety of materials
• Dual-angled countersink reduces wood splitting
• Resisto-Plate™ TF for corrosion protection
• Phillips and Square Drive
• Ideal for hard and soft woods, particleboard, sheet metal up to 24 Ga., masonry, cement block, brick, adobe and stucco (Longer length screws may require a pilot hole in hard woods.)
*Dia. No. 8 – use 1/8" drill size
Dia. No. 10 – use 5/32" drill size
Dia. 1/4" – use 3/16" drill size
No anchor required. (Use rotary drill mode only for hollow block.)
Technical Specifications
| Item#: | P60784 |
|---|---|
| Diameter | #6 |
| Length | 1 " |
| Material | Steel |
| Head Style | Flat |
| Type | Multi-Material Screw |
| Finish | Bright Zinc |
| Point | Sharp |
| Screw Type | Self Drilling |
| Thread | Serrated |
| Size | No. 6 " |
| Drive | Phillips/Square |
| UNSPSC #: | 31161508 |
| TAA Compliant: | Yes |
| Weight: | 0.3 lb |
Product Restrictions
