Pilotdrive Cryotap 1/2"-20 Starter Hand Tap
(Pack of
1)
SKU:DY80635018 Item#: DY80635018
Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
Cryophase™ Treated - Increases tool life and maximizes torsion strength
Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
Material: High Speed Steel
Coating: Gold Oxide
Hardness: 64-66Rc
Number of Chamfered Threads: 4 to 4-1/2 Threads
Cryophase™: Thermal cycle cryogenic treatment
Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Double End Drill Bit 1/8"
$0.00
Couldn't load pickup availability
General Purpose Reciprocating Saw Blade 8"
$0.00
Couldn't load pickup availability
Inner Panel Rustproofer LV 16.5oz
$0.00
Couldn't load pickup availability
10" Dual Jaw Adj and Pipe Wrench
$0.00
Couldn't load pickup availability
Quick Seal 2000 Sprayable Seam Sealer Black
$0.00
Couldn't load pickup availability
Nylon Cable Tie 15-1/4" Black
$0.00
Couldn't load pickup availability
Rocker Door and Exterior Molding Retainer
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 10mm
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 1/4-20
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 6-32
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap 1/4"-20 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap M10
$0.00
Couldn't load pickup availability
4-Flute HSS Plug Hand Tap M8 x 1
$0.00
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 9/16-18
$0.00
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
$0.00
Couldn't load pickup availability
3/4" X 24" Pinch Pry Bar
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
Product Description
Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
Cryophase™ Treated - Increases tool life and maximizes torsion strength
Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
Material: High Speed Steel
Coating: Gold Oxide
Hardness: 64-66Rc
Number of Chamfered Threads: 4 to 4-1/2 Threads
Cryophase™: Thermal cycle cryogenic treatment
Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635018 |
|---|---|
| Type | Fractional |
| Diameter | 1/2 " |
| Pitch | 20 |
| Flutes | 4 |
| Thread Length | 15/16 " |
| H Limits | H3 |
| Overall Length | 3-3/8 " |
| Recommended Drill Size | 29/64 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.095 lb |
Product Restrictions
