Pilotdrive Cryotap 1/4"-20 Starter Hand Tap
(Pack of 1)

SKU:DY80635009 Item#: DY80635009

CryoTool®

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More

Frequently Bought Together

DV_ZoomOriginal_P_1072.jpg

Reinforced Mini Cut-Off Wheel 3"

Item#: 93483M12
DV_ZoomOriginal_I_1447373.jpg

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Item#: 1447373
DV_ZoomOriginal_P_548.jpg

General Purpose Jobber Length Drill Bit HSS 4.2mm

Item#: 36459
DV_ZoomOriginal_I_DY89310230.jpg

3Pc Adjustable/Pipe Wrench Set

Item#: DY89310230
DV_ZoomOriginal_I_KT14093.jpg

Quick Seal 2000 Sprayable Seam Sealer Beige

Item#: KT14093
DV_ZoomOriginal_I_61952.jpg

Cable Tie Hook and Loop Roll 15' Orange

Item#: 61952
DV_ZoomOriginal_I_KT12847.jpg

Bumper Fascia Push-Type Retainer Nylon 18mm

Item#: KT12847
DV_ZoomOriginal_I_1372010.jpg

Push-Type Retainer Nylon 15mm

Item#: 1372010
DV_ZoomOriginal_I_1420584.jpg

Front Bumper Specialty Nut Steel M4.2-1.41

Item#: 1420584
DV_ZoomOriginal_I_61137.jpg

HSS Spiral Point Hand Tap 7/16-20

Item#: 61137
DV_ZoomOriginal_I_61129.jpg

HSS Spiral Point Hand Tap 1/4-28

Item#: 61129
DV_ZoomOriginal_I_63496.jpg

HSS Spiral Point Hand Tap M4 x 0.7

Item#: 63496
DV_ZoomOriginal_P_CTPMP1164.jpg

Cryotap 1/2"-13 Tri-Pak

Item#: DY80692902
DV_ZoomOriginal_I_DY80681016.jpg

Cryotap M10 x 1.5 Metric Taper Hand Tap

Item#: DY80681016
DV_ZoomOriginal_I_DY80680710.jpg

Cryotap M7 x 1.0 Metric Plug Hand Tap

Item#: DY80680710
DV_ZoomOriginal_P_39036_AP2.jpg

Abrasive Bristle Wire Belt Steel 23mm

Item#: KT12707
DV_ZoomOriginal_I_KT12712.jpg

Polymer Wheel Rubber Eraser 30mm

Item#: KT12712
DV_ZoomOriginal_P_3141.jpg

Spot Weld Remover Drill Bit HSS 3" (M10)

Item#: 54456

Product Description

• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: DY80635009
Type Fractional
Diameter 1/4 "
Pitch 20
Flutes 4
Thread Length 5/8 "
H Limits H3
Overall Length 2-1/2 "
Recommended Drill Size No. 7
UNSPSC #: 23241615
TAA Compliant: No
Weight: 0.03 lb

Product Restrictions

Your Recently Viewed Items