Pilotdrive Cryotap 3/8"-16 Starter Hand Tap
(Pack of
1)
SKU:DY80635013 Item#: DY80635013
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed
• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
Air Saw Blade 4" 24TPI
$0.00
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
$0.00
Couldn't load pickup availability
Front Rear Bumper Specialty Rivet 3.2mm
$0.00
Couldn't load pickup availability
Fender Lining Screw Grommet Nylon #12
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap M10 x 1.5
$0.00
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Starter Hand Tap
$0.00
Couldn't load pickup availability
HSS Spiral Point Hand Tap 8-36
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap 10-24
$0.00
Couldn't load pickup availability
HSS Combination Drill-Tap M8
$0.00
Couldn't load pickup availability
Cryotap 7/16"-20 Bottoming Hand Tap
$0.00
Couldn't load pickup availability
7" Auto-Adjust Pliers
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
$0.00
Couldn't load pickup availability
Product Description
• Easiest Starting Tap - CENTERLine™ point firmly lodges in the hole to eliminate tap shifting or wobbling with no guide blocks needed• Non-Drifting - CENTERLine™ point maintains alignment from start to finish even while hand tapping
• Cryophase™ Treated - Increases tool life and maximizes torsion strength
• Precise - Perfect for tapping thin metals because the first few tapped threads are as clean and precise as the last few tapped threads
Specifications
• Material: High Speed Steel
• Coating: Gold Oxide
• Hardness: 64-66Rc
• Number of Chamfered Threads: 4 to 4-1/2 Threads
• Cryophase™: Thermal cycle cryogenic treatment
• Thread Standard: Exceeds ANSI B1.1
Note: Not intended for depths greater than 1-1/2 times tap diameter.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80635013 |
|---|---|
| Type | Fractional |
| Diameter | 3/8 " |
| Pitch | 16 |
| Flutes | 4 |
| Thread Length | 3/4 " |
| H Limits | H3 |
| Overall Length | 2-15/16 " |
| Recommended Drill Size | 5/16 " |
| UNSPSC #: | 23241615 |
| TAA Compliant: | No |
| Weight: | 0.07 lb |
Product Restrictions
